LENGTH: Length is before weld. Stud diameters (D) 1/2" and below will be approximately 1/8" shorter after welding. 5/8" and larger will be approximately 3/16" shorter after welding.
MATERIAL: Low carbon steel ASTM: A-496
|
Online Quote Form |
Mechanical Property Requirements |
| |
Type C3 |
| Tensile Strength |
80,000 psi min
(552 MPa) |
Yield Strength
(0.2% offset
(0.5% offset |
___
70,000 psi min
(485 MPa)
|
Elongation
(% in 2-in.) |
__ |
| Reduction of Area |
__ |
| 3 |
Type C studs are cold-worked deformed steel bars manufactured in accordance with specification ASTM A496 having a minimal diameter equivalent to the diameter of a plain wire having the same weight per foot as the deformed wire. ASTM A496 specifies a maximum diameter of 0.628 in. (16 mm) maximum. Any bar supplied above that diameter must have the same physical characteristics regarding deformations as required by ASTM A496. |
|
|
