Directory
Arc Stud Welding Equipment
TW-1200
Solid State Stud Welding System
Direct Current/Constant Current Output
Stepless Control and Current Adjustments
Built in Chuck Saver Feature
System comes complete with Solid State Power Supply, #16 A ground cable, control/weld cable, TW-625 Stud Gun AND initial setup accessories-chuck, foot/grip
| Rated Weld Output | 1200 Amperes 44 Volts @ 20% Duty Cycle |
|---|---|
| Stud Capacity | 3/16 thru 5/8 inch inclusive |
| Voltage | 230 / 460 / 575 VAC |
| Fusing (Stud) | 200 / 100 / 80 Amps |
| Input Power | Three Phase 230, 460, 575 Volts Alternating Current |
| Welding Time | 100 - 800 Milliseconds Adjustable |
| Welding Process Type | Shielded Metal Arc (SMAW) |
| Max Open Circuit Voltage | 70 Volts Direct Current (72 OCV) |
| Amperage Range | STUD\300 - 1200 ADC Stepless Adjustment |
| Dimensions | 30-1/4" H x 22-3/4" W x 35-3/4" D (475# Net) |
SC-2000
Solid State Stud Welding System
Direct Current/Constant Current Output
Stepless Control and Current Adjustments
System comes complete with Solid State Power Supply, 4/0 ground cable, control/weld cable, Heavy Duty HD-35 Stud Gun and initial setup accessories (chuck, foot/grip).
| Rated Weld Output | 2000 Amperes 44 Volts @ 20% Duty Cycle |
|---|---|
| Stud Capacity | 1/4" thru 1" inch inclusive |
| Voltage | 230 / 380 / 460 / 575 VAC |
| Fusing (Stud) | 400 / 233 / 200 / 160 Amps |
| Freq. | 50/60hz |
| Duty Cycle | 1" 8 per minute / 3/4" or smaller unlimited |
| Dimensions | 27-1/4" H x 22-1/4" W x 35-3/4" D (520 lbs Net) |
SC 3400 - Dual Gun Coming Soon!
Solid State Stud Welding System
The SC3400 is a fully integrated stud welding system with two digital controls for time and current. The system was designed to meet the most challenging stud welding jobs to include weld thru-deck applications.
Machine Specificationsthe largest diameter jobs.
the welding output.
chuck wear.
| Input Voltages | 230 / 460 / 575 VAC 3 Phase 60Hz 220 / 440 / 380 / 400 VAC 3 phase 50Hz |
|---|---|
| Fusing Requirements (Slow Acting) | 230/200 Amps 460/100 Amps 575/90 Amps |
| Weld Range & Duty Cycle |
1/4" to 1-1/4" Diameter Welding Range 1/4" through 5/8" - Unlimited 3/4" 22-24 per min 7/8" 16-18 per min 1" 12-14 per minute |
| Dimensions | 29" H x 28" W x 36" D (750 lbs Net) |
Complete System Includes
Arc 1850
The ARC-1850 is a fully regulated stud welding power supply that is available in a single or dual gun version. Both versions have the constant output feature that allows the unit to be used as a power source that can operate external stud welding control units. Stick welding and Arc air gouging processes are available only as an option. An added feature in the ARC-1850 is the ability to dial in the desired weld time and weld current before making a weld. By selecting the setup mode, the weld time and current can be adjusted and displayed on the front panel's digital meters. A specially designed electronic gun control circuit has been incorporated into the system. If a fault condition occurs due to a shorted gun solenoid or a faulty control cable, the circuit will prevent gun re-triggering and eliminate damage to printed circuit boards.
| Welding Range | 12 ga thru 7/8" |
|---|---|
| Welding Material | Mild Steel,Stainless |
| Welding Curent | 12 ga - 5/8 =unlimited / 3/4"= 10 min 7/8= 4 min |
| Welding Current | 1850 amps @45 VDC |
| Welding Time | .1-1.6 sec |
| Primary Power | 230/460/575 Vac 3 phase |
| Fuse | 200/100/90 Delay type |
| Power Source | Transformer / Rectifier |
| Dimensions | 26" x 24" x 33 " H x W x D |
| Weight | 500 Lbs |
| PN# | 200-0022 Single Gun System or 200-0023 Dual Gun System |
Arc 3000
The ARC-3000 is a fully regulated stud welding power supply that is available in a single or dual gun version. Both versions have the constant output feature that allows the unit to be used as a power source that can operate external stud welding control units. An added feature in the ARC-3000 is the ability to dial in the desired weld time and weld current before even making a weld. By selecting the setup mode, the weld time and current can be adjusted and displayed on the front panel digital meters. A specially designed electronic gun control circuit has been incorporated into the system. If a fault condition occurs due to a shorted gun solenoid or a faulty control cable, the circuit will prevent gun re-triggering and eliminate damage to printed circuit boards. The ARC-3000 system is capable of welding studs from 1/4" diameter to 1-1/4" diameter with precision and repeatability.
| Welding Range | 12 ga thru 7/8" |
|---|---|
| Welding Material | Mild Steel,Stainless |
| Welding Curent | 1/4- 3/8=unlimited 1/2"= 60/min 5/8"=30/min 3/4"=20/min 7/8"=15/min 1"=10/min |
| Welding Current | 400-3000 amps @ 44 VDC |
| Welding Time | .1-1.8 |
| Primary Power | 230/460/575 Vac 3 phase |
| Fuse | 400/200/180 Delay type |
| Power Source | Transformer / Rectifier |
| Dimensions | 36" x 28" x 40 " H x W x D |
| Weight | 950 Lbs |
| PN# | 200-0016 Single Gun System or 200-0017 Dual Gun System |